920952
New product
Performance Gain (Stock Golf R): 10-13hp, 12-15Nm
EVENTURI Carbon Air Intake for VW Golf 8 R
The MK8 Golf GTi / R intake is a complete redesign from the original intake to the turbo inlet. Eventuri has maximised the use of available space to create an intake that can cater for all power levels, from stock to high-power versions with hybrid or full-frame turbos.
This intake system has been developed to provide the highest possible flow while maintaining the lowest possible intake temperatures. Every component has been designed to provide a smooth and fluid path for the turbo. The restrictive 73mm diameter intake tube is replaced by a larger 94mm diameter intake tube. The filter itself has an outer diameter of 192mm or 7.5″ with a filtration area of over 110,000mm^2.
The patented Venturi housing has been designed to provide the maximum possible internal volume for the space available in the Golf's engine compartment and provides laminar flow to the turbo tube. Finally, the duct seals the filter opening to the front panel but is not restricted by the stock inlet feed alone. Eventuri has raised the front of the duct to provide an additional opening behind the bonnet, which equates to an additional 7″ diameter hole for the intake. The resulting system can significantly extend out of the stock airbox while keeping intake temperatures to a minimum due to the sealed design.
The Eventuri 2.0 TFSi Generation 4 system uses patented carbon fibre housings that provide an aerodynamically efficient airflow path from filter to turbo tube. Not just another conical filter with a heat shield, but a unique design that invokes the Venturi effect.
Features:
- Performance Gain (Stock Golf R): 10-13hp, 12-15Nm
- Performance Gain (Tuned Golf R): 15-20hp, 25-30Nm
- Flow Bench Data: Stock R Intake 455 CFM : Eventuri R Intake 783 CFM
- Flow Bench Data: Stock GTi Intake 435 CFM : Eventuri GTi Intake 618 CFM
The kit includes:
- Carbon Fiber Patented Venturi Filter Housing with 94mm Outlet
- Bespoke High Flow Dry Cone Filter
- Carbon Fiber Inlet Duct - Full Width
- Silicon tube with 94mm inlet diameter
- Machined breather adapter (Golf R only)
- Secondary Breather Filter and Bracket (USA spec Golf GTi)
- Laser Cut Stainless Steel Brackets
Equipment available to order +/- 2/3 weeks
Compatibility:
Model: VW MK8 GOLF R / GTI Clubsport
Material | Carbon |
Power | + 10-13 HP |
Torque | + 9-11 FT LBS |