EVENTURI Carbon Turbo Inlet for Audi RS3 8V MKII

920938

New product

Increase in output from 14 to 20 hp

More details

749,00 €

Payez en 3x ou 4x sans frais

Payez en plusieurs fois

  • Cofidis 3 fois sans frais à partir de 249,67 €
  • Cofidis 4 fois sans frais à partir de 187,25 €

EVENTURI Carbon Turbo Inlet for Audi RS3 8V MKII

 

Introducing a world first - an all-carbon RS3 / TTRS turbo inlet elbow. Eventuri has invested months of intense R&D into the development of an inlet that leaves no room for compromise. VOLUME - FLOW QUALITY - TEMPERATURE are the 3 main design criteria Eventuri has sought to meet.

1) VOLUME: Inlet diameters - Eventuri 103mm: Stock 72mm. Outlet diameters - Eventuri 74mm: Stock 56.4mm. Clearly with significantly larger internal diameter sizes, the Eventuri elbow encapsulates a much larger internal volume that delineates the flow path to the turbo.

2) FLOW QUALITY: Just having a large internal volume is no good unless the flow path also allows for a smooth flow of air to the turbo. By using high-temperature pre-impregnated carbon fibre, Eventuri has managed to achieve a smooth internal surface. In contrast, the stock and other aftermarket elbows are all made from cast aluminium which end up with a rough internal surface. This, combined with the smooth curvature of the elbow, gives a flow path that minimises turbulence.

3) TEMPERATURE: The final criterion was to minimise heat conduction in the air stream. The original inlet is directly connected to the turbo and thus conducts heat immediately to the turbo coils. The system uses a machined flange that connects to the turbo, then a silicone coupler with an integrated thermal spacer to prevent the carbon elbow from making direct contact with the turbo. This barrier, coupled with the low thermal conductivity through the thickness of the carbon fibre, reduces heat transfer to the airflow.

 

Features:

- Stock Airbox with Modified Stock Turbo Inlet for TTE700 = 576.5 HP
- Eventuri Stage 3 Intake with Modified Stock Turbo Inlet for TTE700 = 606.5 HP
- Eventuri Stage 3 Intake with Eventuri Turbo Inlet for TTE700 = 620.8 HP
- Performance Gain (RS3 with Hybrid Turbo): 14-20hp, 30-35ft-lb
Flow Rate increase at 24″ H2O : 42% increase over stock (Using Stock Flange)

 

The kit includes:

- High Temperature Carbon Inlet Elbow - RHD and LHD Specific
- CNC Machined Turbo Flanges - optional choices
- Silicon Couplers With Oil Resistant Lining
- Marine Grade Stainless Steel Hose Clamps

 

Equipment available to order +/- 2/3 weeks

  

Compatibility:

Model: AUDI RS3 8V Gen 2, 8Y RS3, F3 RSQ3 et TTRS 8S Conduite à gauche et à droite.